I'm excited to be participating in this blog hop in which we're featuring these newly released stencils from the talented Andrea Matus deMeng. I first saw these stunning designs a couple of weeks ago, and it's been really hard to keep them a secret until today's unveiling!
I'm lucky enough to be able to use this beautiful design, called Precocious Peony today.
I'm experimenting with a technique, based on a piece of art I saw a couple of years ago. Sadly, I can't remember where I saw it and I don't really know how it was made, but I know the final piece had Silks Acrylic Glaze painted onto black gesso. Based on what I remembered, and some things I found in my husbands workshop, I decided to experiment and see what I could come up with. Happily the end result turned out alright so I'm able to share it with you!
If you want to try this, you'll need:
-drywall compound
-a piece of wood (or other sturdy material) cut to the finished size you desire.
-a putty knife
-sandpaper
-something pointy with which to 'draw' (I'm using a seam ripper, but a ballpoint pen, an awl or a stiff piece of wire will work.)
-black gesso
-Silks Acrylic Glaze
-paint brushes (a sponge brush for the gesso and smaller paintbrushes for the Silks)
-a water jar for cleaning brushes
-Golden Self Levelling Clear Gel
-patience...because this has to be done over a couple of days!
Step 1:
Sand the surface of your wood to roughen it up a bit so the drywall compound with stick well.
Step 2:
Read this whole step before starting...Mix up a small amount of drywall compound to a nice spreadable consistency, but not too runny. (I only mix enough for each thin layer each time). Using the putty knife, spread a thin layer of the drywall compound onto the piece of wood, keeping it as smooth and even as you can so that the entire surface is covered. Let dry completely-my drywall compound says it is dry in 45 minutes but some take longer so read the package (this is where the patience comes in...not my strong suit!).
While that's drying, scrape any excess compound into the garbage and wash the container and putty knife with water.
Repeat this step several times until you have about a 1/4" - 3/8" layer of compound. It is better to add thin layers many times to avoid cracking. (See what I mean about needing patience!).
Step 3:
Using sandpaper, sand* the final dry surface of the drywall compound until it is completely flat and smooth. Sand the sides of the block too, to get any little bits of drywall compound that may have got on them. (You can see from the image on the left that my 'before' was not terribly smooth but it still sanded up beautifully).
*Drywall dust is messy, so do this outside if possible.
Step 4:
Position your stencil onto the surface, and using your pointy 'drawing' tool etch the design into the surface of the drywall compound. Consider flipping your stencil over to give you another variation of the design. You can add any additional drawing/doodling you wish by etching into the surface.
Step 5:
Paint the entire surface and the sides with black gesso, ensuring you get into the grooves you created while 'drawing' but without filling those grooves up with excess gesso. A sponge brush works great for this because you can dip the pointy edge into the groove to soak up the excess gesso. Let dry completely (there's that need for patience again...)
Step 6:
Using the small paintbrushes and the Silks, paint your design however you like. Notice I took the design over the edge with the paint.
Step 7:
Wait...more patience...According to the jar, Silks required 48hrs to fully cure so go find something else to do for the next couple of days!
Step 8:
Add a layer of the Golden Self Levelling Gel to the top and sides of the painting. I set mine up on another jar of Golden product to elevate it up off the table while I added the layer of gel and let it dry.
Step 9:
Sit back and admire your handiwork!
Great news...StencilGirl has a giveaway!
-a putty knife
-Golden Self Levelling Clear Gel
Sand the surface of your wood to roughen it up a bit so the drywall compound with stick well.
Step 2:
While that's drying, scrape any excess compound into the garbage and wash the container and putty knife with water.
Repeat this step several times until you have about a 1/4" - 3/8" layer of compound. It is better to add thin layers many times to avoid cracking. (See what I mean about needing patience!).
*Drywall dust is messy, so do this outside if possible.
Wait...more patience...According to the jar, Silks required 48hrs to fully cure so go find something else to do for the next couple of days!
Step 8:
Add a layer of the Golden Self Levelling Gel to the top and sides of the painting. I set mine up on another jar of Golden product to elevate it up off the table while I added the layer of gel and let it dry.
Two winners: one will receive a set of the new 6"x 6" stencils
and one will receive a set of the new 9" x 12"
All comments left on the hop are eligible for the giveaway so
the more blogs you comment on, the more chances you will have to win.
Have fun and GOOD LUCK!
The giveaway will close on Sunday, April 6th at 11:59PM Central Time.
Please Note: Although this is considered a one day hop,
you have the ENTIRE week to comment to win the prize.
Note about replies during blog hops: Blogger seems to cut me off at a certain number of replies (no sure how many) and then stops letting me post comments from you. Since I want anyone to have a chance to win the giveaway prizes, I have decided to only reply if someone asks a direct question.
Please know that all of your comments are much appreciated. I do read them all, and I thank you for all of your kind and thoughtful words!
Blog Hop Order
Linda Kittmer- You are here
Carolyn Dube-Your next stop...
